Up-to-date reference of API arguments for VPC router route you can get at documentation portal
DEPRECATED
opentelekomcloud_networking_router_route_v2¶
Creates a routing entry on a OpenTelekomCloud V2 router.
Example Usage¶
resource "opentelekomcloud_networking_router_v2" "router_1" {
name = "router_1"
admin_state_up = "true"
}
resource "opentelekomcloud_networking_network_v2" "network_1" {
name = "network_1"
admin_state_up = "true"
}
resource "opentelekomcloud_networking_subnet_v2" "subnet_1" {
network_id = opentelekomcloud_networking_network_v2.network_1.id
cidr = "192.168.199.0/24"
ip_version = 4
}
resource "opentelekomcloud_networking_router_interface_v2" "int_1" {
router_id = opentelekomcloud_networking_router_v2.router_1.id
subnet_id = opentelekomcloud_networking_subnet_v2.subnet_1.id
}
resource "opentelekomcloud_networking_router_route_v2" "router_route_1" {
depends_on = ["opentelekomcloud_networking_router_interface_v2.int_1"]
router_id = opentelekomcloud_networking_router_v2.router_1.id
destination_cidr = "10.0.1.0/24"
next_hop = "192.168.199.254"
}
Argument Reference¶
The following arguments are supported:
router_id- (Required) ID of the router this routing entry belongs to. Changing this creates a new routing entry.destination_cidr- (Required) CIDR block to match on the packet’s destination IP. Changing this creates a new routing entry.next_hop- (Required) IP address of the next hop gateway. Changing this creates a new routing entry.
Attributes Reference¶
The following attributes are exported:
router_id- See Argument Reference above.destination_cidr- See Argument Reference above.next_hop- See Argument Reference above.
-> Note: The next_hop IP address must be directly reachable from the router at the opentelekomcloud_networking_router_route_v2
resource creation time. You can ensure that by explicitly specifying a dependency on the opentelekomcloud_networking_router_interface_v2
resource that connects the next hop to the router, as in the example above.