2024-05-30 | Deleted section "OS Patch Notes for Cluster Nodes". Added Node OS. Describes how to obtain the value of the available_zone, l4_flavor_name and l7_flavor_name.
|
2024-04-28 | Supported the creation of clusters of v1.28. Supported IPv6. Clusters of version 1.27 or later do not support nodes running EulerOS 2.5 or CentOS 7.7. For details, see Before You Start.
|
2024-03-29 | |
2024-01-29 | |
2023-11-06 | |
2023-08-15 | |
2023-05-30 | |
2023-02-10 | |
2022-12-20 | |
2022-11-21 | Added Best Practice. |
2022-08-27 | EulerOS 2.9 is supported. |
2022-07-13 | Supported egress rules. For details, see Network Policies. |
2022-05-24 | |
2022-05-16 | Added Linux Polkit Privilege Escalation Vulnerability (CVE-2021-4034). |
2022-04-14 | Allowed cluster upgrade from v1.19 to v1.21. |
2022-03-24 | Supported the creation of clusters of v1.21. Two-way authentication is supported for domain name access. For details, see Two-Way Authentication for Domain Names. The Docker storage mode of nodes running CentOS 7 in CCE clusters is changed from Device Mapper to OverlayFS. For details, see Node Overview.
|
2022-02-17 | Supported the creation of CCE Turbo Cluster. |
2021-12-14 | The validity period of the certificate of cluster can be configured. For details, see Obtaining a Cluster Certificate. |
2021-11-30 | |
2021-11-15 | |
2021-06-23 | Updated autoscaler. Added values HA50, HA200, and Custom for Add-on Specifications. Updated parameter names to Scale-in Cooldown After Scale-out, Scale-in Cooldown After Node Deletion, and Scale-in Cooldown After Failure.
|
2021-05-21 | Supported the creation of clusters of v1.19.8. Clusters of v1.17 can be upgraded to v1.19. Supported Pod Security Policies. Deleted the description of Open source images. Deleted the description of DNAT.
|
2021-01-30 | |
2020-11-02 | Allowed cluster upgrade from v1.15 to v1.17. |
2020-09-25 | Supported clusters of v1.17.9. |
2020-07-17 | Updated the description of GPU-accelerated nodes. |
2020-03-25 | Supported clusters of v1.15.6. |
2020-02-21 | Updated Namespaces. |
2019-10-30 | Added the gpu-beta add-on. Revised descriptions to indicate support for creating Kubernetes clusters 1.13.10. Added the Encryption parameter for creating EVS or SFS volumes. Supported downloading of cluster certificates. Supported selection of multiple subnets when a node is added to a cluster of 1.13.10.
|
2019-09-30 | Added permission management. Supported workload creation in YAML mode and online editing of the YAML file. Supported pool management.
|
2019-09-11 | Updated Migrating Data from CCE 1.0 to CCE 2.0. |
2019-09-03 | Revised descriptions according to the suggestions raised in UAT. |
2019-07-30 | Allows users to modify Maximum Number of Unavailable Pods after creating an application. Allows users to add pod scheduling policies after creating an application. For details, see Affinity and Anti-Affinity Scheduling.
|
2019-07-29 | Revised descriptions according to the suggestions raised in UAT. |
2019-07-25 | |
2019-07-15 | |
2019-07-11 | Revised descriptions according to the suggestions raised in UAT. |
2019-06-30 | Added management of the coredns, storage-driver, and autoscaler add-ons. coredns and storage-driver are mandatory for clusters of Kubernetes v1.11. For details, see 12-Add-on Management and 3.3-Creating a Hybrid Cluster. Added the support for cluster and EIP binding to enable two-way authentication. For details, see 3.3-Creating a Hybrid Cluster and 3.4-Creating a BMS Cluster. Added the support for configuration of VM clusters of Kubernetes v1.11.7 and service network segments. For details, see 3.3-Creating a VM Cluster. Added the support for configuration of system resources during node creation. For details, see 3.7-Creating a Node in a Hybrid Cluster. Added the support for cluster upgrade from v1.9 to v1.11. For details, see 3.11-Upgrading a Cluster.
|
2019-05-30 | Added application lifecycle management and health checking. For details, see 4.6-Setting Container Lifecycle, 4.7-Setting Container Startup Command, 4.8-Checking the Health of Containers. Added job lifecycle management. For details, see 6-Job Management. Added Container Network Segment and Advanced Settings to the Create Hybrid Cluster page. For details, see 3.3-Creating a Hybrid Cluster. Updated the example nginx-deployment.yaml and nginx-elb-svc.yaml files that are used to deploy a CCE service and automatically create a load balancer. For details, see 5.5-External Access - Elastic Load Balancer. Added the guidelines for configuring CoreDNS HA by using kubectl. For details, see 3.6-Configuring kube-dns/CoreDNS HA Using kubectl.
|
2019-05-10 | Added 14-CTS. |
2019-04-29 | Described privileged containers and security context in 4.2-Creating a Stateless Application and 4.3-Creating a Stateful Application. Updated 4.4-Upgrading an Application. Added the support for automatic creation of enhanced load balancers. For details, see 5.3-Intra-VPC Access, 5.5-External Access - Elastic Load Balancer, and 5.6-Layer 7 Load Balancing (Ingress). Revised descriptions in the previous issue.
|
2019-03-13 | Revised descriptions to indicate support for creating Kubernetes clusters 1.11.3. Added an example of automatically creating a load balancer when creating a service using YAML. For details, see 4.2-Creating a Stateless Application Using kubectl and 5.5-Implementing Public Network Access (ELB) Using kubectl.
|
2019-02-22 | Accepted in OTC-4.0/Agile-02.2019. Added a note describing that automatically created storage volumes are not tagged in 4.2-Creating a Stateless Application, 4.3-Creating a Stateful Application, 8.3-Using EVS Disks, and 8.4-Using SFS File Systems.
|
2019-02-15 | |
2019-01-29 | Revised descriptions according to the suggestions raised in UAT. |
2019-01-15 | |
2019-01-03 | Added the DeH parameter in 3.3-Table Parameters for creating a node. Added 5.6-Layer 7 Load Balancing (Ingress). Added the procedure for setting the access mode after an application is created in 5.2-Intra-Cluster Access, 5.3-Intra-VPC Access, 5.4-External Access - Elastic IP Address, and 5.5-External Access - Elastic Load Balancer. Modified the installation and uninstallation procedures in 3.4-Adding Existing Nodes to a BMS Cluster. Revised descriptions in the previous issue.
|
2018-12-03 | |
2018-11-15 | |
2018-11-12 | Revised descriptions in the previous issue. |
2018-11-09 | Accepted in OTC 3.2. |
2018-11-07 | Added the description of annotations to the nginx-elb-svc.yaml file in step2 of 5.5-Implementing Public Network Access (ELB) Using kubectl. |
2018-10-19 | Updated the sensitive information with sample value. For details, see 3.4-Adding Existing Nodes to a BMS Cluster. |
2018-10-10 | Added the description of the applications heapster-apiserver and kube-dns automatically generated when a cluster is created. For details, see 3.3-Creating a Hybrid Cluster. |
2018-09-25 | Added the description of obtaining a Long-Term Valid Docker Login Command. For details, see 11.9-Obtaining a Long-Term Valid Docker Login Command. |
2018-09-15 | Added a step to the procedure of adding a node to a BMS cluster. For details, see 3.4-Adding Existing Nodes to a BMS Cluster. Deleted the EVS and ELB related constraints. For details, see 3.4-Constraints.
|
2018-09-05 | Only manual scaling is supported by stateful applications. For details, see 4.10-Manual Scaling. Added the procedure for creating BMS clusters. Added the description of using the existing EVS disk to create a PV and binding the PV to a PVC. For details, see 8.3-Creating a PV/PVC for an Existing EVS Disk Using kubectl. Added the description of using the existing file system to create a PV and binding the PV to a PVC. For details, see 8.4-Creating a PV/PVC for an Existing File System Using kubectl.
|
2018-07-25 | Added the description of using EVS disks. For details, see 10.5-Using an EVS Disk. Added the description of using load balancers. For details, see 10.6-Using Load Balancers. Only manual scaling is supported by stateful applications. For details, see 4.10-Manual Scaling. Deleted the procedure for creating BMS clusters.
|
2018-06-21 | Added the description of the intra-VPC load balancing function. For details, see 5.3-Intra-VPC Access. Updated some UI elements.
|
2018-06-07 | Added the description of configuring the image repository name in 11.2-Table Parameters for creating an image repository. |
2018-06-01 | |
2018-05-26 | Updated the description of the CCE. CCE provides enhanced functions based on Kubernetes. See 1.1-Basic Concepts. Updated the procedure for creating an application in Getting Started. A third-party image is used instead of a private image to create an application. See 2.3-Creating a Containerized Application. Updated the description of cluster HA. See 3.3-Creating a Hybrid Cluster. Deleted section "Upgrading a Cluster". The cluster of the latest version is used, which cannot be upgraded. Added information that describes when the cluster is unavailable. See 3.13-Cluster Statuses. Updated the description of Intra-VPC Access in section "Application Access Settings". Currently, the ELB is not supported. See 5.3-Intra-VPC Access. Added the description of necessary concepts in section "Container Orchestration". See 10.1-Basic Concepts. Deleted section "How Do I Prepare a Docker Image". This is the basic concept about Docker and does not need to be described. Added sections 3.4-Creating a BMS Cluster and 4.13-Using a Third-party Image to Create an Application.
|
2018-04-28 | This issue is the first official release. |