Querying Private IP Address Details

Function

This API is used to query details about a private IP address using the specified ID.

URI

GET /v1/{project_id}/privateips/{privateip_id}

Table 1 describes the parameters.

Table 1 Parameter description

Name	Mandatory	Description
project_id	Yes	Specifies the project ID.
privateip_id	Yes	Specifies the ID of the private IP address, which uniquely identifies the private IP address.

Request Parameters

None

Example Request

GET https://{Endpoint}/v1/{project_id}/privateips/d600542a-b231-45ed-af05-e9930cb14f78

Response Parameters

Table 2 Response parameter

Name	Type	Description
privateip	privateip object	Specifies the private IP address objects. For details, see Table 3.

Table 3 Description of the privateip field

Name	Type	Description
status	String	Specifies the status of the private IP address. Possible values are as follows: ACTIVE DOWN
id	String	Specifies the ID of the private IP address, which uniquely identifies the private IP address.
subnet_id	String	Specifies the ID of the subnet from which IP addresses are assigned. If you use the management console, the value of this parameter is the Network ID value.
tenant_id	String	Specifies the project ID.
device_owner	String	Specifies the resource using the private IP address. The parameter is left blank if it is not used. The value can be: network:dhcp: DHCP service IP address network:router_interface_distributed: Gateway IP address compute:xxx (xxx indicates the AZ name. For example, compute:aa-bb-cc indicates that the IP address is used by an ECS in the AZ aa-bb-cc.): IP address of an ECS NIC neutron:VIP_PORT: Virtual IP address neutron:LOADBALANCERV2: IP address of a shared load balancer neutron:LOADBALANCERV3: IP address of a dedicated load balancer network:endpoint_interface: IP address of a VPC endpoint network:nat_gateway: IP address used by a NAT gateway The value range specifies only the type of private IP addresses supported by the current service.
ip_address	String	Specifies the assigned private IP address.

Example Response

{
    "privateip":
        {
            "status": "DOWN",
            "id": "d600542a-b231-45ed-af05-e9930cb14f78",
            "subnet_id": "531dec0f-3116-411b-a21b-e612e42349fd",
            "tenant_id": "8b7e35ad379141fc9df3e178bd64f55c",
            "device_owner": "",
            "ip_address": "192.168.1.11"
        }
}

Status Code

See Status Codes.

Error Code

See Error Codes.

last updated: 2024-05-05 00:07