Modifying a VPN

Scenarios

If the VPN network information conflicts the VPC network information or you need to adjust VPN configurations, you can modify a VPN.

Procedure

1. Log in to the management console.

2. Click in the upper left corner and select a region and project.

3. On the console homepage, under Network, click Virtual Private Network.

4. On the Virtual Private Network page, locate the target VPN and click Modify.

5. In the displayed dialog box, set parameters as prompted.

   

   Figure 1 Modifying a VPN

6. Click OK.

last updated: 2024-08-29 08:56