Step 2: Creating a Customer Gateway¶
Procedure¶
In the navigation pane on the left, choose Virtual Private Network > Enterprise - Customer Gateways.
On the Customer Gateways page, click Create Customer Gateway.
Set parameters as prompted and click OK.
The following describes only key parameters.
Table 1 Customer gateway parameters¶ Parameter
Description
Example Value
Name
Name a customer gateway.
cgw-001
Routing Mode
Set the routing mode of the customer gateway.
The options include Dynamic (BGP) and Static.
Static
Gateway IP Address
Enter the IP address of the customer gateway.
IP Address, 22.xx.xx.22
BGP ASN
The BGP ASN needs to be specified only when Routing Mode is set to Dynamic (BGP).
Enter the ASN of your on-premises data center or private network.
The BGP ASN of the customer gateway must be different from that of the VPN gateway.
65000
Advanced Settings > Tags
Configure Tags in Advanced Settings.
-
Verification¶
Check the created customer gateway on the Customer Gateways page.