Querying IPsec Policies¶

Function¶

This interface is used to query IPsec policies.

URI¶

GET /v2.0/vpn/ipsecpolicies

Request Message¶

Table 1 describes the request parameters.

**Table 1** Request parameters¶
Parameter	Type	Mandatory	Description
fields	String	No	Controls which parameters are returned. If this parameter is not specified, all parameters will be returned.

Note

The project_id parameter is not supported.

Response Message¶

Table 2 describes the response parameters.

**Table 2** Response parameters¶
Parameter	Type	Description
transform_protocol	String	Specifies the transform protocol used. The value can be esp, ah, or ah-esp. The default value is esp.
tenant_id	String	Specifies the project ID.
id	String	Specifies the IPsec policy ID.
encapsulation_mode	String	Specifies the encapsulation mode. The default value is tunnel.
pfs	String	Specifies the PFS. The value can be group1, group2, group5, group14, group15, group16, group19, group20, group21, or disable. The default value is group5. The value disable indicates that the PFS function is disabled.
lifetime	Object	Specifies the lifetime object of SA.
name	String	Specifies the IPsec policy name.
auth_algorithm	String	Specifies the authentication hash algorithm. The value can be md5, sha1, sha2-256, sha2-384, or sha2-512.
description	String	Provides supplementary information about the IPsec policy.
ipsecpolicies	List<Object>	Specifies the IPsec policy list.
encryption_algorithm	String	Specifies the encryption algorithm. The value can be 3des, aes-128, aes-192, or aes-256. The default value is aes-128.
value	Integer	Specifies the lifetime value of the SA. The default unit is seconds. The default value is 3600.
units	String	Specifies the lifecycle unit. The default value is seconds.

Example¶

Example Request
```
GET /v2.0/vpn/ipsecpolicies
```

Example Response

{
  "ipsecpolicies" : [ {
    "name" : "ipsecpolicy1",
    "transform_protocol" : "esp",
    "auth_algorithm" : "sha1",
    "encapsulation_mode" : "tunnel",
    "encryption_algorithm" : "aes-128",
    "pfs" : "group14",
    "project_id" : "ccb81365fe36411a9011e90491fe1330",
    "tenant_id" : "ccb81365fe36411a9011e90491fe1330",
    "lifetime" : {
      "units" : "seconds",
      "value" : 3600
    },
    "id" : "5291b189-fd84-46e5-84bd-78f40c05d69c",
    "description" : ""
  } ]
}

Returned Values¶

For details, see section Common Returned Values.

last updated: 2024-05-03 03:06