Querying IPsec VPN Connections¶

Function¶

This interface is used to query IPsec VPN connections.

URI¶

GET /v2.0/vpn/ipsec-site-connections

Request Message¶

Table 1 describes the request parameters.

**Table 1** Request parameters¶
Parameter	Type	Mandatory	Description
fields	String	No	Controls which parameters are returned. If this parameter is not specified, all parameters will be returned.

Note

The project_id, peer_id, dpd, and local_id parameters are not supported.

Response Message¶

Table 2 describes the response parameters.

**Table 2** Response parameters¶
Parameter	Type	Description
peer_cidrs	List<String>	(Deprecated) Specifies the tenant's CIDR blocks. The value is in the form of <net_address > / < prefix >.
mtu	Integer	Specifies the maximum transmission unit to address fragmentation.
peer_ep_group_id	String	Specifies the endpoint group ID (tenant CIDR blocks).
ikepolicy_id	String	Specifies the IKE policy ID.
dpd	Object	Specifies the DPD protocol control.
route_mode	String	Specifies the route advertising mode. The default value is static.
peer_address	String	Specifies the remote gateway address.
peer_id	String	Specifies the remote gateway ID.
id	String	Specifies the IPsec VPN connection ID.
description	String	Provides supplementary information about the IPsec VPN connection.
project_id	String	Specifies the project ID.
interval	Integer	Specifies the DPD interval in seconds. The default value is 30.
timeout	Integer	Specifies the DPD timeout. The default value is 120 seconds.
action	String	Specifies the DPD action. The value can be clear, hold, restart, disabled, or restart-by-peer. The default value is hold.
vpnservice_id	String	Specifies the VPN service ID.
local_ep_group_id	String	Specifies the endpoint group ID (VPC subnets).
status	String	Specifies the IPsec VPN connection status. The value can be ACTIVE, DOWN, BUILD, ERROR, PENDING_CREATE, PENDING_UPDATE, or PENDING_DELETE.
psk	String	Specifies the pre-shared key.
initiator	String	Specifies whether this VPN can only respond to connections or both respond to and initiate connections.
name	String	Specifies the IPsec VPN connection name.
admin_state_up	Boolean	Specifies the administrative status. The value can be true or false.
tenant_id	String	Specifies the project ID.
ipsecpolicy_id	String	Specifies the IPsec policy ID.
auth_mode	String	Specifies the authentication mode. The default value is psk.

Example Request¶

GET /v2.0/vpn/ipsec-site-connections

Example Response¶

{
  "ipsec_site_connections" : [ {
    "status" : "PENDING CREATE",
    "psk" : "secret",
    "initiator" : "bi-directional",
    "name" : "vpnconnection1",
    "admin_state_up" : true,
    "project_id" : "10039663455a446d8ba2cbb058b0f578",
    "tenant_id" : "10039663455a446d8ba2cbb058b0f578",
    "auth_mode" : "psk",
    "peer_cidrs" : [ ],
    "mtu" : 1500,
    "peer_ep_group_id" : "9ad5a7e0-6dac-41b4-b20d-a7b8645fddf1",
    "ikepolicy_id" : "9b00d6b0-6c93-4ca5-9747-b8ade7bb514f",
    "vpnservice_id" : "5c561d9d-eaea-45f6-ae3e-08d1a7080828",
    "dpd" : {
      "action" : "hold",
      "interval" : 30,
      "timeout" : 120
    },
    "route_mode" : "static",
    "ipsecpolicy_id" : "e6e23d0c-9519-4d52-8ea4-5b1f96d857b1",
    "local_ep_group_id" : "3e1815dd-e212-43d0-8f13-b494fa553e68",
    "peer_address" : "172.24.4.226",
    "peer_id" : "172.24.4.226",
    "id" : "851f280f-5639-4ea3-81aa-e298525ab74b",
    "description" : ""
  } ]
}

Returned Values¶

For details, see section Common Returned Values.

last updated: 2024-08-29 00:50