Querying a Security Group Rule¶
Function¶
This API is used to query details about a specific security group rule.
URI¶
GET /v2.0/security-group-rules/{security_group_rule_id}
Request Parameters¶
None
Example Request¶
GET https://{Endpoint}/v2.0/security-group-rules/1755bc80-cf3a-4f57-8ae9-d9796482ddc0
Response Parameters¶
Parameter | Type | Description |
|---|---|---|
security_group_rule | security_group_rule object | Specifies the security group rule. For details, see Table 2. |
Attribute | Type | Description |
|---|---|---|
id | String | Specifies the security group rule ID. This parameter is not mandatory when you query security group rules. |
description | String | Provides supplementary information about the security group rule. |
security_group_id | String | Specifies the ID of the belonged security group. |
remote_group_id | String | Specifies the peer ID of the belonged security group. |
direction | String | Specifies the direction of the traffic for which the security group rule takes effect. |
remote_ip_prefix | String | Specifies the peer IP address segment. |
protocol | String | Specifies the protocol type or the IP protocol number. |
port_range_max | Integer | Specifies the maximum port number. When ICMP is used, the value is the ICMP code. |
port_range_min | Integer | Specifies the minimum port number. If the ICMP protocol is used, this parameter indicates the ICMP type. When the TCP or UDP protocol is used, both port_range_max and port_range_min must be specified, and the port_range_max value must be greater than the port_range_min value. When the ICMP protocol is used, if you specify the ICMP code (port_range_max), you must also specify the ICMP type (port_range_min). |
ethertype | String | Specifies the network type. IPv4 and IPv6 are supported. |
tenant_id | String | Specifies the project ID. |
remote_address_group_id | String |
|
project_id | String | Specifies the project ID. |
created_at | String | Specifies the time (UTC) when the security group rule is created. Format: yyyy-MM-ddTHH:mm:ss |
updated_at | String | Specifies the time (UTC) when the security group rule is updated. Format: yyyy-MM-ddTHH:mm:ss |
Example Response¶
{
"security_group_rule": {
"remote_group_id": null,
"direction": "egress",
"remote_ip_prefix": null,
"protocol": null,
"tenant_id": "6fbe9263116a4b68818cf1edce16bc4f",
"port_range_max": null,
"security_group_id": "723bc02c-d7f7-49b5-b6ff-d08320f315e2",
"port_range_min": null,
"ethertype": "IPv4",
"description": null,
"id": "1755bc80-cf3a-4f57-8ae9-d9796482ddc0",
"project_id": "6fbe9263116a4b68818cf1edce16bc4f",
"created_at": "2018-09-20T02:15:34",
"updated_at": "2018-09-20T02:15:34",
"remote_address_group_id": null
}
}
Status Code¶
See Status Codes.
Error Code¶
See Error Codes.