Removing an Interface from a Router

Function

Removing an interface from a router will also remove the port.

Restrictions

You are not allowed to remove an interface from a router if there are load balancers in the subnet.

URI

PUT /v2.0/routers/{router_id}/remove_router_interface

Request Parameters

Table 1 Request parameter

Parameter

Type

Mandatory

Description

subnet_id

String

No

Specifies the subnet ID. Either subnet_id or port_id must be specified.

Use the gateway IP address of the subnet to create a router interface.

port_id

String

No

Specifies the port ID. Either subnet_id or port_id is used. Use the port IP address to create a router interface.

Example Request

Remove an interface from a router. The router ID is b625c58c-0cfe-49e0-acc8-f2374f8187ff, and the subnet ID is 4b910a10-0860-428b-b463-d84dbc5e288e.

PUT https://{Endpoint}/v2.0/routers/b625c58c-0cfe-49e0-acc8-f2374f8187ff/remove_router_interface

{"subnet_id": "4b910a10-0860-428b-b463-d84dbc5e288e"}

Response Parameters

Table 2 Response parameter

Parameter

Type

Description

subnet_id

String

Specifies the subnet ID.

tenant_id

String

Specifies the project ID.

project_id

String

Specifies the project ID.

port_id

String

Specifies the port ID.

id

String

Specifies the router ID.

Example Response

{
  "subnet_id": "4b910a10-0860-428b-b463-d84dbc5e288e",
  "tenant_id": "3d72597871904daeb6887f75f848b531",
  "project_id": "3d72597871904daeb6887f75f848b531",
  "port_id": "34d7d063-8f40-4958-b420-096db40d4067",
  "id": "b625c58c-0cfe-49e0-acc8-f2374f8187ff"
}

Status Code

See Status Codes.

Error Code

See Error Codes.