Adding an EIP to a Shared Bandwidth¶

Function¶

This API is used to add an EIP to a shared bandwidth.

URI¶

POST /v2.0/{project_id}/bandwidths/{bandwidth_id}/insert

Table 1 describes the parameters.

**Table 1** Parameter description¶
Parameter	Mandatory	Description
project_id	Yes	Specifies the project ID.
bandwidth_id	Yes	Specifies the bandwidth ID, which uniquely identifies the bandwidth.

Request Message¶

Request parameter

**Table 2** Request parameter¶
Parameter	Mandatory	Type	Description
bandwidth	Yes	bandwidth object	Specifies the bandwidth objects. For details, see Table 3.

**Table 3** Description of the **bandwidth** field¶
Parameter	Mandatory	Type	Description
publicip_info	Yes	Array of publicip_info objects	Specifies information about the EIP to be added to the shared bandwidth. For details, see Table 4. The bandwidth, whose type is WHOLE, can be used by multiple EIPs. The number of EIPs varies depending on the tenant quota. By default, a shared bandwidth can be used by up to 20 EIPs.

**Table 4** **publicip_info** object¶
Parameter	Mandatory	Type	Description
publicip_id	Yes	String	Specifies the ID of the EIP that uses the bandwidth.
publicip_type	No	String	Specifies the EIP type. The value can be 5_bgp (Dynamic BGP), 5_mailbgp (Mail BGP), 5_gray (Dedicated Load Balancer), or 5_dualStack. Constraints: The configured value must be supported by the system. publicip_id is an IPv4 port. If publicip_type is not specified, the default value is 5_bgp.

Example request

POST https://{Endpoint}/v2.0/{project_id}/bandwidths/{bandwidth_id}/insert

{
  "bandwidth": {
    "publicip_info": [
      {
        "publicip_id": "29b114d1-2d41-4741-a1f0-b6f80aabceff",
        "publicip_type": "5_bgp",
      }
    ]
  }
}

Response Message¶

Response parameter

**Table 5** Response parameter¶
Parameter	Type	Description
bandwidth	bandwidth object	Specifies the bandwidth objects. For details, see Table 6.

**Table 6** Description of the **bandwidth** field¶
Parameter	Type	Description
name	String	Specifies the bandwidth name. The value can contain 1 to 64 characters, including letters, digits, underscores (_), hyphens (-), and periods (.).
size	Integer	Specifies the bandwidth size. The value ranges from 1 Mbit/s to 1000 Mbit/s by default. (The specific range may vary depending on the configuration in each region. You can see the available bandwidth range on the management console.)
id	String	Specifies the bandwidth ID, which uniquely identifies the bandwidth.
share_type	String	Specifies whether the bandwidth is shared or dedicated. The value can be PER or WHOLE. WHOLE: Shared bandwidth PER: Dedicated bandwidth
publicip_info	Array of publicip_info objects	Specifies information about the EIP that uses the bandwidth. For details, see Table 7. The bandwidth, whose type is WHOLE, can be used by multiple EIPs. The bandwidth, whose type is PER, can be used by only one EIP.
tenant_id	String	Specifies the project ID.
bandwidth_type	String	Specifies the bandwidth type. The default value for the shared bandwidth is share.
charge_mode	String	Specifies that the bandwidth is billed by bandwidth. The value can be traffic.
billing_info	String	Specifies the bill information. If billing_info is specified, the bandwidth is in yearly/monthly billing mode.
enterprise_project_id	String	Specifies the enterprise project ID. The value is 0 or a string that contains a maximum of 36 characters in UUID format with hyphens (-). Value 0 indicates the default enterprise project. When creating a shared bandwidth, associate the enterprise project ID with the shared bandwidth. Note This parameter is unsupported. Do not use it.
status	String	Specifies the bandwidth status. Possible values are as follows: FREEZED (Frozen) NORMAL (Normal)

**Table 7** **publicip_info** objects¶
Parameter	Type	Description
publicip_id	String	Specifies the ID of the EIP that uses the bandwidth.
publicip_address	String	Specifies the obtained EIP if only IPv4 EIPs are available.
ip_version	Integer	Specifies the IP address version. Possible values are as follows: 4: IPv4 6: IPv6 (IPv6 is not supported currently.)
publicip_type	String	Specifies the EIP type. The value can be 5_bgp (Dynamic BGP), 5_mailbgp (Mail BGP), 5_gray (Dedicated Load Balancer), or 5_dualStack. Constraints: The configured value must be supported by the system. publicip_id is an IPv4 port. If publicip_type is not specified, the default value is 5_bgp.

Example response

{
    "bandwidth": {
        "id": "3fa5b383-5a73-4dcb-a314-c6128546d855",
        "name": "bandwidth123",
        "size": 10,
        "share_type": "WHOLE",
        "publicip_info": [
            {
                "publicip_id": "1d184b2c-4ec9-49b5-a3f9-27600a76ba3f",
                "publicip_address": "99.xx.xx.82",
                "publicip_type": "5_bgp",
                "ip_version": 4
            }
        ],
        "tenant_id": "8b7e35ad379141fc9df3e178bd64f55c",
        "charge_mode": "traffic",
        "billing_info": "",
        "bandwidth_type": "share",
        "status": "NORMAL"
    }
}

Status Code¶

See Status Codes.

Error Code¶

See Error Codes.

last updated: 2024-12-11 10:16 UTC - commit: 756520e596a07a17d6436230156d2adb0a5300cf