ALM-45434 A Single Replica Exists in the ClickHouse Data Table¶

Description¶

This alarm is generated when a single replica is detected in a custom logical cluster after the custom logical cluster is enabled for ClickHouse.

This alarm is automatically cleared when the system detects that the custom logical cluster uses multiple replicas.

Alarm ID	Alarm Severity	Auto Clear
45434	Major	Yes

Name	Meaning
Source	Specifies the cluster or system for which the alarm is generated.
ServiceName	Specifies the service for which the alarm is generated.
RoleName	Specifies the role for which the alarm is generated.
HostName	Specifies the host for which the alarm is generated.

If a hardware fault occurs, data cannot be restored.

The metrika.xml file in the ClickHouse configuration directory contains single-replica configuration.

Check whether the configuration in metrika.xml of the ClickHouse instance is correct.

In the alarm list on FusionInsight Manager, locate the row that contains the alarm, and click to view the name of the host for which the alarm is generated. On the Hosts page, view the host IP address based on the host name.
Log in to the host where the ClickHouse instance is abnormal, go to the configuration directory of the ClickHouse instance, and run the following commands:
cd ${BIGDATA_HOME}/FusionInsight_ClickHouse_Version/x_x_ClickHouseServer/etc
cat metrika.xml
View the number of shards in each custom logical cluster and check that a single replica exists. Then, go to 4.
Note
If a shard contains only one node, a single replica exists in a logical cluster, as shown in the following:
```
<shard>
  <internal_replication>true</internal_replication>
  <replica>
    <host>host-name1</host>
    <port>port</port>
    <user>clickhouse</user>
    <password/>
  </replica>
</shard>
```

Collect fault information.

On FusionInsight Manager, choose O&M. In the navigation pane on the left, choose Log > Download.
Expand the Service drop-down list, and select ClickHouse for the target cluster.
Expand the Hosts drop-down list. In the Select Host dialog box that is displayed, select the abnormal host, and click OK.
Click in the upper right corner, and set Start Date and End Date for log collection to 1 hour ahead of and after the alarm generation time, respectively. Then, click Download.
Contact O&M personnel and provide the collected logs.

This alarm is automatically cleared after the fault is rectified.

last updated: 2024-04-27 01:13