ALM-19018 HBase Compaction Queue Size Exceeds the Threshold

Description

The system checks the HBase compaction queue size every 300 seconds. This alarm is generated when the compaction queue size exceeds the alarm threshold (100 by default). This alarm is cleared when the compaction queue size is less than the threshold.

Attribute

Alarm ID

Alarm Severity

Auto Clear

19018

Minor

Yes

Parameters

Name

Meaning

Source

Specifies the cluster for which the alarm is generated.

ServiceName

Specifies the service for which the alarm is generated.

RoleName

Specifies the role for which the alarm is generated.

HostName

Specifies the host for which the alarm is generated.

Impact on the System

The cluster performance may deteriorate, affecting data read and write.

Possible Causes

  • The number of HBase RegionServers is too small.

  • There are excessive regions on a single RegionServer of HBase.

  • The HBase RegionServer heap size is small.

  • Resources are insufficient.

  • Related parameters are not configured properly.

Procedure

Check whether related parameters are properly configured.

  1. Log in to FusionInsight Manager and choose O&M > Alarm > Alarms. On the page that is displayed, check whether the alarm whose Alarm ID is 19008 or 19011 exists.

    • If yes, click View Help next to the alarm and rectify the fault by referring to the help document. Then, go to 3.

    • If no, go to 2.

  2. On FusionInsight Manager, choose Cluster > Name of the desired cluster > Services > HBase. On the page that is displayed, click the Configuration tab then the All Configurations sub-tab, search for hbase.hstore.compaction.min, hbase.hstore.compaction.max, hbase.regionserver.thread.compaction.small, and hbase.regionserver.thread.compaction.throttle, and set them to larger values.

  3. Check whether the alarm is cleared.

    • If yes, no further action is required.

    • If no, go to 4.

Collect the fault information.

  1. On FusionInsight Manager, choose O&M. In the navigation pane on the left, choose Log > Download.

  2. Expand the Service drop-down list, and select HBase for the target cluster.

  3. Click image1 in the upper right corner, and set Start Date and End Date for log collection to 10 minutes ahead of and after the alarm generation time, respectively. Then, click Download.

  4. Contact O&M personnel and provide the collected logs.

Alarm Clearing

This alarm is automatically cleared after the fault is rectified.

last updated: 2024-05-08 03:04