ALM-17006 Oozie Direct Memory Usage Exceeds the Threshold

Description

The system checks the direct memory usage of the Oozie service every 30 seconds. The alarm is generated when the direct memory usage of an Oozie instance exceeds the threshold (80% of the maximum memory). The alarm is cleared when the direct memory usage of Oozie is less than or equal to the threshold.

Attribute

Alarm ID

Alarm Severity

Automatically Cleared

17006

Major

Yes

Parameters

Name

Meaning

Source

Specifies the cluster for which the alarm is generated.

ServiceName

Specifies the service for which the alarm is generated.

RoleName

Specifies the role for which the alarm is generated.

HostName

Specifies the host for which the alarm is generated.

Trigger Condition

Specifies the threshold triggering the alarm. If the current indicator value exceeds this threshold, the alarm is generated.

Impact on the System

The direct memory overflow may cause a service breakdown.

Possible Causes

The direct memory of the Oozie instance is overused or the direct memory is inappropriately allocated.

Procedure

Check direct memory usage.

  1. On the FusionInsight Manager portal, choose O&M > Alarm > Alarms > Oozie Direct Memory Usage Exceeds the Threshold > Location. Check the IP address of the instance involved in this alarm.

  2. On the FusionInsight Manager portal, choose Cluster > Name of the desired cluster > Services > Oozie > Instance. Click the instance for which the alarm is generated to go to the page for the instance. Click the drop-down menu in the chart area and choose Customize > Memory > Oozie Direct Buffer Resource Percentage. Click OK.

  3. Check whether the used direct memory of Oozie reaches the threshold (the default value is 80% of the maximum direct memory) specified for Oozie.

    • If yes, go to 4.

    • If no, go to 6.

  4. On the FusionInsight Manager portal, choose Cluster > Name of the desired cluster > Services > Oozie > Configurations. Click All Configurations. Search GC_OPTS in the search box. Increase the value of -XX:MaxDirectMemorySize as required, and click Save. Click OK.

    Note

    Suggestions on GC parameter settings for Oozie:

    You are advised to set the value of -XX:MaxDirectMemorySize to 1/4 of the value of -Xmx. For example, if -Xmx is set to 4 GB, -XX:MaxDirectMemorySize is set to 1024 MB. If -Xmx is set to 2 GB, -XX:MaxDirectMemorySize is set to 512 MB. It is recommended that the value of -XX:MaxDirectMemorySize be greater than or equal to 512 MB.

  5. Restart the affected services or instances and check whether the alarm is cleared.

    • If yes, no further action is required.

    • If no, go to 6.

Collect fault information.

  1. On the FusionInsight Manager portal, choose O&M > Log > Download.

  2. Select Oozie in the required cluster from the Service drop-down list.

  3. Click image1 in the upper right corner, and set Start Date and End Date for log collection to 10 minutes ahead of and after the alarm generation time, respectively. Then, click Download.

  4. Contact the O&M personnel and send the collected logs.

Alarm Clearing

After the fault is rectified, the system automatically clears this alarm.

last updated: 2024-05-08 03:04