Enabling/Disabling Scheduled Static WTP

You can schedule WTP protection to allow website updates in specific periods.

Note

Exercise caution when you set the periods to disable WTP, because files will not be protected in those periods.

Constraints

Only the servers that are protected by the HSS WTP edition support the operations described in this section.

Rules for Setting an Unprotected Period

  • Unprotected period >= 5 minutes

  • Unprotected period < 24 hours

  • Periods (except for those starting at 00:00 or ending at 23:59) cannot overlap and must have an at least 5-minute interval.

  • A period cannot span two days.

  • The server time is used as a local time base.

Procedure

  1. Log in to the management console.

  2. Click image1 in the upper left corner of the page, select a region, and choose Security > HSS. The HSS page is displayed.

  3. Choose Prevention > Web Tamper Protection, click Configure Protection.

    Note

    If your servers are managed by enterprise projects, you can select an enterprise project to view or operate the asset and scan information.

    **Figure 1** Entering the page for protected directory settings

    Figure 1 Entering the page for protected directory settings

  4. On the Configure Protection tab, click Settings under Scheduled Protection.

    **Figure 2** Configuring scheduled protection

    Figure 2 Configuring scheduled protection

  5. Set the unprotected period and days in a week to automatically disable protection.

    1. Click Add Unprotected Period. Configure parameters in the dialog box that is displayed.

      **Figure 3** Adding an unprotected period

      Figure 3 Adding an unprotected period

      Note

      Configuration constraints:

      • Unprotected period >= 5 minutes

      • Unprotected period < 24 hours

      • Periods (except for those starting at 00:00 or ending at 23:59) cannot overlap and must have an at least 5-minute interval.

      • A period cannot span two days.

      • The server time is used as a time base.

    2. Click OK.

    3. Select the days to disable protection.

      For example, if you select Mon., Thu., and Sat., the server automatically disables the WTP function during the unprotected period on these days.

      **Figure 4** Selecting days to disable protection

      Figure 4 Selecting days to disable protection

    4. Click OK.

  6. Return to the Configure Protection tab and toggle on image2 to enable Scheduled Protection.

    **Figure 5** Enabling scheduled protection

    Figure 5 Enabling scheduled protection

last updated: 2024-09-09 12:47 UTC - commit: 862430799322a6499439e49940ea5739b41ea7c6