• Private Link Access Service

plas
  1. Help Center
  2. Private Link Access Service
  3. User Guide
  4. Getting Started
  5. Manual Provisioning
  6. Modifying PLAS (EC) Configurations

Modifying PLAS (EC) Configurations

Scenarios

You can apply to modify the PLAS configuration by email or hotline after filling in PLAS Order Form Template. The modifications include:

  • Modify the PLAS bandwidth. The bandwidth can be 100 Mbit/s or 1 Gbit/s.
  • Modify the protocol information, including the BFD switch, BGP AS number, and QinQ protocol type.
  • Modify the local subnet used by Direct Connect.

When modifying PLAS configurations, you need to apply for modifying Direct Connect configurations at the same time.

NOTE:

If you want to modify multiple parameters in one time for PLAS, separate every parameter in one PLAS Order Form Template file, and attach all the files in one email. For example: PLAS Modify QinQ Data Order_20180307.xlsxPLAS Modify BGP_AS_NumbQer_Order_20180307.xlsx, and PLAS ModifyBFD_Order_20180307.xlsx.

Procedure

  1. Collect information about PLAS parameters to be modified. For details, see PLAS Order Form Template.
  2. Collect information about Direct Connect parameters to be modified. For details, see Table 1.
    Table 1 Parameters required for enabling Direct Connect

    Parameter

    Description

    Example Value

    Domain Name

    For details about how to obtain the domain name, see section Obtaining the Domain Name.

    abc123

    Region

    For details about how to obtain the region, see section Obtaining Region.

    eu-de

    Redundancy connection

    A redundant connection is required to access Open Telekom Cloud through PLAS. AZ Biere and AZ Magdeburg provide two access points, respectively. The value must be Yes.

    Yes

    VPC ID

    For details about how to obtain its value, see section Obtaining the VPC ID.

    13e2e8cb-5894-496c-8688-7b08c485e70b

    Port Type

    Specifies the port type. The value can be 1GE or 10GE.

    1GE

    Local Subnet

    Specifies the subnet segment of the local VPC connected to Direct Connect.

    A maximum of 25 local subnets can be configured.

    The local subnet and remote subnet cannot be in the same network segment.

    192.168.1.0/24,192.168.51.0/24

    Remote Subnet

    Specifies the tenant subnet. The values must be private IP addresses with subnet masks. Multiple subnets are separated with commas (,).

    A maximum of 50 remote subnets can be configured.

    The local subnet and remote subnet cannot be in the same network segment.

    192.168.10.0/24,192.168.52.0/24

    Bandwidth

    Specifies the bandwidth. The maximum value is 1 Gbit/s.

    1Gbit/s

    Name

    Specifies the connection name. The value is a character string of no more than 64 characters that can contain letters, numbers, underscores (_), and hyphens (-).

    directconnect-001

  3. Based on the parameters collected in step 1 and step 2, modify PLAS configurations using either of the following methods:
    • Emails: Send us an email with the title "Modifying PLAS configurations".
    • Hotline: Call us and provide the collected information to the customer service.
  4. Wait for the email and obtain the service ticket from the customer.
  5. Wait for the notification of the result from the email or customer service.