• MapReduce Service

mrs
  1. Help Center
  2. MapReduce Service
  3. User Guide
  4. MRS Manager Operation Guide
  5. Alarm Reference
  6. ALM-12014 Partition Lost

ALM-12014 Partition Lost

Description

The system checks the partition status periodically. This alarm is generated when the system detects that a partition to which service directories are mounted is lost (because the device is removed or goes offline, or the partition is deleted).

This alarm must be manually cleared.

Attribute

Alarm ID

Alarm Severity

Automatically Cleared

12014

Major

No

Parameters

Parameter

Description

ServiceName

Specifies the service for which the alarm is generated.

RoleName

Specifies the role for which the alarm is generated.

HostName

Specifies the host for which the alarm is generated.

DirName

Specifies the directory for which the alarm is generated.

PartitionName

Specifies the device partition for which the alarm is generated.

Impact on the System

Service data fails to be written into the partition, and the service system runs abnormally.

Possible Causes

  • The hard disk is removed.
  • The hard disk is offline, or a bad sector exists on the hard disk.

Procedure

  1. On MRS Manager, click Alarm, and click the alarm in the real-time alarm list.
  2. In the Alarm Details area, obtain HostNamePartitionName and DirName from Location.
  3. Check whether the disk of PartitionName on HostName is inserted to the correct server slot.

  4. Contact hardware engineers to remove the faulty disk.
  5. Use PuTTY to log in to the HostName node where an alarm is reported and check whether there is a line containing DirName in the /etc/fstab file.

  6. Run the vi /etc/fstab command to edit the file and delete the line containing DirName.
  7. Contact hardware engineers to insert a new disk. For details, see the hardware product document of the relevant model. If the faulty disk is in a RAID group, configure the RAID group. For details, see the configuration methods of the relevant RAID controller card.
  8. Wait 20 to 30 minutes (The disk size determines the waiting time), and run the mount command to check whether the disk has been mounted to the DirName directory.

    • If yes, manually clear the alarm. No further operation is required.
    • If no, go to Step 9.

  9. Collect fault information.

    1. On MRS Manager, choose System > Export Log.
    2. Contact technical support engineers for help, detail see technical support.

Related Information

N/A