• Bare Metal Server

bms
  1. Help Center
  2. Bare Metal Server
  3. User Guide
  4. Storage
  5. Attaching a Disk

Attaching a Disk

If the existing disks of a BMS fail to meet service requirements, for example, due to insufficient disk space or poor disk performance, you can attach more available disks to the BMS, or create more disks on the Storage page and attach them to the BMS.

Prerequisites

Disks are available.

For details about how to create an EVS disk, see section "Creating an EVS Disk" in Elastic Volume Service User Guide.

NOTE:

If DSS is used, see the Dedicated Storage Service User Guide for how to create disks.

Procedure

  1. Log in to the management console.
  2. Click in the upper left corner and select the desired region and project.
  3. Under Computing, click Bare Metal Server.
  4. In the upper right corner of the BMS list, enter the name, private IP address, ID, or flavor of a BMS and click to search for the desired BMS.
  5. Click the name of the target BMS.

    The page showing details of the BMS is displayed.

  6. Click the Disks tab. Then, click Attach Disk.

    The Attach Disk dialog box is displayed.

  7. Select the disk type and target disk, and set the mount point as prompted.
    NOTE:

    If no EVS disks are available, click Create Disk in the lower part of the list.

    For the restrictions on attaching disks, see What Are the Restrictions for Attaching a Disk to a BMS?

  8. Click OK.

    After the disk is attached, you can view the information about it on the Disks tab.

Follow-up Procedure

If the attached disk is newly created, the disk can be used only after it is initialized (formatted). For details about how to initialize data disks, see Initializing Data Disks.

NOTE:

After the BMS is restarted, the drive letter of the EVS disk may change. For the mapping between the EVS disk device and drive letter, see How Do I Obtain the Drive Letter of an EVS Disk?