• Bare Metal Server

bms
  1. Help Center
  2. Bare Metal Server
  3. Private Image Creation Guide (BMS)
  4. Creating a Linux Image
  5. Installing the Driver
  6. (Optional) Installing the mpt3 Disk Driver

(Optional) Installing the mpt3 Disk Driver

Procedure

  1. Upload the RAID-3008_3416IT-CentOS7.3-mpt3sas-23.00.00.00-1-x86_64.rpm package obtained in section Preparations to the VM. For details, see step 11 in section Configuring the VM Environment.
  2. Install the mpt3 disk driver.
    1. Enter the directory where the .rpm package is stored and run the following command to install the driver:

      rpm -ivh RAID-3008_3416IT-CentOS7.3-mpt3sas-23.00.00.00-1-x86_64.rpm

      [root@localhost mpt3-82599]# rpm -ivh RAID-3008_3416IT-CentOS7.3-mpt3sas-23.00.00.00-1-x86_64.rpm
      Preparing...                               ################################## [100%]
      Updating / installing...
         1:kmod-mpt3sas-23.00.00.00_el7.3-1      ################################## [100%]
      [root@localhost mpt3-82599]#
    2. Run the dracut -f command to update the kernel.
  3. After the installation is complete, run the rpm -qa | grep mpt3 command to check whether the installation is successful.
    kmod-mpt3sas-23.00.00.00_el7.3-1.x86_64