Creating an IPsec VPN Connection¶

Function¶

This interface is used to create an IPsec VPN connection.

URI¶

POST /v2.0/vpn/ipsec-site-connections

Request Message¶

Table 1 lists the request parameters for creating an IPsec site connection.

**Table 1** Request parameters¶
Parameter	Type	Mandatory	Description
dpd	Object	No	Specifies the DPD protocol control.
local_id	String	No	Specifies the ID of the external gateway address of a virtual router.
psk	String	Yes	Specifies the pre-shared key.
initiator	String	No	Specifies whether this VPN can only respond to connections or both respond to and initiate connections.
ipsecpolicy_id	String	Yes	Specifies the IPsec policy ID.
admin_state_up	Boolean	No	Specifies the administrative status. The value can be true or false.
mtu	Integer	No	Specifies the maximum transmission unit to address fragmentation.
peer_ep_group_id	String	Yes	Specifies the endpoint group ID (tenant CIDR blocks).
ikepolicy_id	String	Yes	Specifies the IKE policy ID.
vpnservice_id	String	Yes	Specifies the VPN service ID.
local_ep_group_id	String	Yes	Specifies the endpoint group ID (VPC subnets).
peer_address	String	Yes	Specifies the remote gateway address.
peer_id	String	Yes	Specifies the remote gateway ID.
name	String	No	Specifies the IPsec VPN connection name.
description	String	No	Provides supplementary information about the IPsec VPN connection.
auth_mode	String	No	Specifies the authentication mode. The default value is psk.
peer_cidrs	List<String>	No	(Deprecated) Specifies the tenant's CIDR blocks. The value is in the form of <net_address > / < prefix >.
tenant_id	String	No	Specifies the project ID.

Note

The project_id, peer_id, dpd, and local_id parameters are not supported.
The value of tenant_id can contain a maximum of 255 characters.
The value of name can contain 1 to 64 characters.
The value of description can contain a maximum of 255 characters. This parameter has been used by internal components, and you are not allowed to configure the parameter.
The value of peer_address can contain a maximum of 250 characters.
The value of peer_id can contain a maximum of 250 characters and is unconfigurable.
The route_mode parameter cannot be configured. The default value is static.
The value of mtu can only be 1500.
The value of initiator can only be bi-directional.
The value of auth_mode can only be psk.
The value of admin_state_up can only be true.
A PSK can contain 6 to 128 characters. Spaces and question marks (?) are not allowed in a PSK. The PSK cannot contain only asterisks (*).
To enable two IPsec connections to work in active/standby mode, the local_ep_group_id and peer_ep_group_id parameters of the active and standby connections must be set to the same value. If the parameter values are different and the local_ep_group and peer_ep_group values are different, the connection cannot work in active/standby mode.

Response Message¶

Table 2 describes the response parameters.

**Table 2** Response parameters¶
Parameter	Type	Description
interval	Integer	Specifies the DPD interval in seconds. The default value is 30.
dpd	Object	Specifies the DPD protocol control.
psk	String	Specifies the pre-shared key.
initiator	String	Specifies whether this VPN can only respond to connections or both respond to and initiate connections.
ipsecpolicy_id	String	Specifies the IPsec policy ID.
admin_state_up	Boolean	Specifies the administrative status. The value can be true or false.
mtu	Integer	Specifies the maximum transmission unit to address fragmentation.
peer_ep_group_id	String	Specifies the endpoint group ID (tenant CIDR blocks).
ikepolicy_id	String	Specifies the IKE policy ID.
vpnservice_id	String	Specifies the VPN service ID.
local_ep_group_id	String	Specifies the endpoint group ID (VPC subnets).
peer_address	String	Specifies the remote gateway address.
peer_id	String	Specifies the remote gateway ID.
name	String	Specifies the IPsec VPN connection name.
description	String	Provides supplementary information about the IPsec VPN connection.
auth_mode	String	Specifies the authentication mode. The default value is psk.
id	String	Specifies the IPsec VPN connection ID.
route_mode	String	Specifies the route advertising mode. The default value is static.
status	String	Specifies the IPsec VPN connection status. The value can be ACTIVE, DOWN, BUILD, ERROR, PENDING_CREATE, PENDING_UPDATE, or PENDING_DELETE.
peer_cidrs	List	(Deprecated) Specifies the tenant's CIDR blocks. The value is in the form of <net_address > / < prefix >.
tenant_id	String	Specifies the project ID.
timeout	Integer	Specifies the DPD timeout. The default value is 120 seconds.
action	String	Specifies the DPD action. The value can be clear, hold, restart, disabled, or restart-by-peer. The default value is hold.
created_at	String	Specifies the time when the IPsec connection was created.

Example¶

Example Request

POST /v2.0/vpn/ipsec-site-connections
{
  "ipsec_site_connection" : {
    "psk" : "secret",
    "initiator" : "bi-directional",
    "ipsecpolicy_id" : "e6e23d0c-9519-4d52-8ea4-5b1f96d857b1",
    "admin_state_up" : true,
    "mtu" : 1500,
    "peer_ep_group_id" : "9ad5a7e0-6dac-41b4-b20d-a7b8645fddf1",
    "ikepolicy_id" : "9b00d6b0-6c93-4ca5-9747-b8ade7bb514f",
    "vpnservice_id" : "5c561d9d-eaea-45f6-ae3e-08d1a7080828",
    "local_ep_group_id" : "3e1815dd-e212-43d0-8f13-b494fa553e68",
    "peer_address" : "172.24.4.233",
    "peer_id" : "172.24.4.233",
    "name" : "vpnconnection1"
  }
}

Example Response

{
  "ipsec_site_connection" : {
    "status" : "PENDING_CREATE",
    "psk" : "secret",
    "initiator" : "bi-directional",
    "name" : "vpnconnection1",
    "admin_state_up" : true,
    "tenant_id" : "10039663455a446d8ba2cbb058b0f578",
    "auth_mode" : "psk",
    "peer_cidrs" : [ ],
    "mtu" : 1500,
    "peer_ep_group_id" : "9ad5a7e0-6dac-41b4-b20d-a7b8645fddf1",
    "ikepolicy_id" : "9b00d6b0-6c93-4ca5-9747-b8ade7bb514f",
    "vpnservice_id" : "5c561d9d-eaea-45f6-ae3e-08d1a7080828",
    "dpd" : {
      "action" : "hold",
      "interval" : 30,
      "timeout" : 120
    },
    "route_mode" : "static",
    "vpnservice_id": "4754261f-f8c5-4799-a365-78b2e682e38a",
    "ipsecpolicy_id" : "e6e23d0c-9519-4d52-8ea4-5b1f96d857b1",
    "local_ep_group_id" : "3e1815dd-e212-43d0-8f13-b494fa553e68",
    "peer_address" : "172.24.4.233",
    "created_at": "2018-11-03 14:24:33.749714",
    "peer_id" : "172.24.4.233",
    "id" : "851f280f-5639-4ea3-81aa-e298525ab74b",
    "description" : ""
  }
}

Returned Values¶

For details, see section Common Returned Values.

last updated: 2024-04-25 02:42