Initializing a Linux Data Disk (parted)

Scenarios

This section uses CentOS 7.4 64bit to describe how to initialize a data disk attached to a server running Linux and use parted to partition the data disk.

The maximum partition size that MBR supports is 2 TiB and that GPT supports is 18 EiB. If the disk size you need to partition is greater than 2 TiB, partition the disk using GPT.

The fdisk partitioning tool is suitable only for MBR partitions, and the parted partitioning tool is suitable for both MBR and GPT partitions. For more information, see Scenarios and Disk Partitions.

The method for initializing a disk varies slightly depending on the OS running on the server. This document is used for reference only. For the detailed operations and differences, see the product documents of the corresponding OS.

Important

When using a disk for the first time, if you have not initialized it, including creating partitions and file systems, the additional space added to this disk in an expansion later may not be normally used.

Prerequisites

  • A data disk has been attached to a server and has not been initialized.

  • You have logged in to the server.

    • For how to log in to an ECS, see the Elastic Cloud Server User Guide.

    • For how to log in to a BMS, see the Bare Metal Server User Guide.

Creating and Mounting a Partition

The following example shows you how a new partition can be created on a new data disk that has been attached to a server. The partition will be created using parted, and GPT will be used. Furthermore, the partition will be formatted using the ext4 file system, mounted on /mnt/sdc, and configured to mount automatically at startup.

  1. Query information about the new data disk.

    lsblk

    Information similar to the following is displayed:

    root@ecs-test-0001 ~]# lsblk
    NAME   MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
    vda    253:0    0   40G  0 disk
    └─vda1 253:1    0   40G  0 part /
    vdb    253:16   0  100G  0 disk
    

    In the command output, this server contains two disks. /dev/vda and /dev/vdb. /dev/vda is the system disk, and /dev/vdb is the new data disk.

  2. Launch parted to partition the new data disk.

    parted New data disk

    In this example, run the following command:

    parted /dev/vdb

    Information similar to the following is displayed:

    [root@ecs-test-0001 ~]# parted /dev/vdb
    GNU Parted 3.1
    Using /dev/vdb
    Welcome to GNU Parted! Type 'help' to view a list of commands.
    (parted)
    
  3. Enter p and press Enter to view the current disk partition style.

    Information similar to the following is displayed:

    (parted) p
    Error: /dev/vdb: unrecognised disk label
    Model: Virtio Block Device (virtblk)
    Disk /dev/vdb: 107GiB
    Sector size (logical/physical): 512B/512B
    Partition Table: unknown
    Disk Flags:
    (parted)
    

    In the command output, the Partition Table value is unknown, indicating that no partition style is set for the new disk.

  4. Set the disk partition style.

    mklabel Disk partition style

    This command lets you control whether to use MBR or GPT for your partition table. In this example, GPT is used.

    mklabel gpt

    Important

    The maximum disk size supported by MBR is 2 TiB, and that supported by GPT is 18 EiB. Because an EVS data disk currently supports up to 32 TiB, use GPT if your disk size is greater than 2 TiB.

    If the partition style is changed after the disk has been used, all data on the disk will be lost, so take care to select an appropriate partition style when initializing the disk. If you must change the partition style to GPT after a disk has been used, it is recommended that you back up the disk data before the change.

  5. Enter p and press Enter to view the disk partition style.

    Information similar to the following is displayed:

    (parted) mklabel gpt
    (parted) p
    Model: Virtio Block Device (virtblk)
    Disk /dev/vdb: 107GiB
    Sector size (logical/physical): 512B/512B
    Partition Table: gpt
    Disk Flags:
    
    Number  Start  End  Size  File system  Name  Flags
    
    (parted)
    

    In the command output, the Partition Table value is gpt, indicating that the disk partition style is GPT.

  6. Enter unit s and press Enter to set the measurement unit of the disk to sector.

  7. Create a new partition.

    mkpart Partition name Start sector End sector

    In this example, run the following command:

    mkpart test 2048s 100%

    In this example, one partition is created for the new data disk, starting on 2048 and using 100% of the rest of the disk. The two values are used for reference only. You can determine the number of partitions and the partition size based on your service requirements.

    Information similar to the following is displayed:

    (parted) mkpart opt 2048s 100%
    (parted)
    
  8. Enter p and press Enter to print the partition details.

    Information similar to the following is displayed:

    (parted) p
    Model: Virtio Block Device (virtblk)
    Disk /dev/vdb: 209715200s
    Sector size (logical/physical): 512B/512B
    Partition Table: gpt
    Disk Flags:
    
    Number  Start  End         Size        File system  Name  Flags
     1      2048s  209713151s  209711104s               test
    
    (parted)
    
  9. Enter q and press Enter to exit parted.

    Information similar to the following is displayed:

    (parted) q
    Information: You may need to update /etc/fstab.
    

    You can configure automatic mounting by updating the /etc/fstab file. Before doing so, format the partition with a desired file system and mount the partition on the mount point.

  10. View the disk partition information.

    lsblk

    Information similar to the following is displayed:

    [root@ecs-test-0001 ~]# lsblk
    NAME   MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
    vda    253:0    0   40G  0 disk
    └─vda1 253:1    0   40G  0 part /
    vdb    253:16   0  100G  0 disk
    └─vdb1 253:17   0  100G  0 part
    

    In the command output, /dev/vdb1 is the partition you created.

  11. Format the new partition with a desired file system format.

    mkfs -t File system format /dev/vdb1

    In this example, the ext4 format is used for the new partition.

    mkfs -t ext4 /dev/vdb1

    Information similar to the following is displayed:

    [root@ecs-test-0001 ~]# mkfs -t ext4 /dev/vdb1
    mke2fs 1.42.9 (28-Dec-2013)
    Filesystem label=
    OS type: Linux
    Block size=4096 (log=2)
    Fragment size=4096 (log=2)
    Stride=0 blocks, Stripe width=0 blocks
    6553600 inodes, 26213888 blocks
    1310694 blocks (5.00%) reserved for the super user
    First data block=0
    Maximum filesystem blocks=2174746624
    800 block groups
    32768 blocks per group, 32768 fragments per group
    8192 inodes per group
    Superblock backups stored on blocks:
            32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
            4096000, 7962624, 11239424, 20480000, 23887872
    
    Allocating group tables: done
    Writing inode tables: done
    Creating journal (32768 blocks): done
    Writing superblocks and filesystem accounting information: done
    

    The formatting takes a period of time. Observe the system running status and do not exit.

    Important

    The partition sizes supported by file systems vary. Choose an appropriate file system format based on your service requirements.

  12. Create a mount point.

    mkdir Mount point

    In this example, the /mnt/sdc mount point is created.

    mkdir /mnt/sdc

    Note

    The /mnt directory exists on all Linux systems. If the mount point cannot be created, it may be that the /mnt directory has been accidentally deleted. You can run mkdir -p /mnt/sdc to create the mount point.

  13. Mount the new partition on the created mount point.

    mount Disk partition Mount point

    In this example, the /dev/vdb1 partition is mounted on /mnt/sdc.

    mount /dev/vdb1 /mnt/sdc

  14. Check the mount result.

    df -TH

    Information similar to the following is displayed:

    [root@ecs-test-0001 ~]# df -TH
    Filesystem     Type      Size  Used Avail Use% Mounted on
    /dev/vda1      ext4       43G  1.9G   39G   5% /
    devtmpfs       devtmpfs  2.0G     0  2.0G   0% /dev
    tmpfs          tmpfs     2.0G     0  2.0G   0% /dev/shm
    tmpfs          tmpfs     2.0G  9.0M  2.0G   1% /run
    tmpfs          tmpfs     2.0G     0  2.0G   0% /sys/fs/cgroup
    tmpfs          tmpfs     398M     0  398M   0% /run/user/0
    /dev/vdb1      ext4      106G   63M  101G   1% /mnt/sdc
    

    You should now see that partition /dev/vdb1 is mounted on /mnt/sdc.

    Note

    After the server is restarted, the disk will not be automatically mounted. You can modify the /etc/fstab file to configure automount at startup. For details, see Configuring Automatic Mounting at System Start.

Configuring Automatic Mounting at System Start

The fstab file controls what disks are automatically mounted at server startup. You can configure the fstab file of a server that has data. This operation will not affect the existing data.

The following example uses UUIDs to identify disks in the fstab file. You are advised not to use device names (like /dev/vdb1) to identify disks in the file because device names are assigned dynamically and may change (for example, from /dev/vdb1 to /dev/vdb2) after a server stop or start. This can even prevent your server from booting up.

Note

UUIDs are the unique character strings for identifying partitions in Linux.

  1. Query the partition UUID.

    blkid Disk partition

    In this example, the UUID of the /dev/vdb1 partition is queried.

    blkid /dev/vdb1

    Information similar to the following is displayed:

    [root@ecs-test-0001 ~]# blkid /dev/vdb1
    /dev/vdb1: UUID="0b3040e2-1367-4abb-841d-ddb0b92693df" TYPE="ext4"
    

    Carefully record the UUID, as you will need it for the following step.

  2. Open the fstab file using the vi editor.

    vi /etc/fstab

  3. Press i to enter editing mode.

  4. Move the cursor to the end of the file and press Enter. Then, add the following information:

    UUID=0b3040e2-1367-4abb-841d-ddb0b92693df /mnt/sdc                ext4    defaults        0 2
    
  5. Press Esc, enter :wq, and press Enter.

    The system saves the configurations and exits the vi editor.

  6. Verify that the disk is auto-mounted at startup.

    1. Unmount the partition.

      umount Disk partition

      In this example, run the following command:

      umount /dev/vdb1

    2. Reload all the content in the /etc/fstab file.

      mount -a

    3. Query the file system mounting information.

      mount | grep Mount point

      In this example, run the following command:

      mount | grep /mnt/sdc

      If information similar to the following is displayed, automatic mounting has been configured:

      root@ecs-test-0001 ~]# mount | grep /mnt/sdc
      /dev/vdb1 on /mnt/sdc type ext4 (rw,relatime,data=ordered)