Why Does the Disk Attachment of a Linux ECS Fail After I Modify the ECS Specifications?¶
Scenarios¶
After you modify specifications of a Linux ECS, disk attachment may fail. You need to check the disk attachment after you modify the specifications.
Procedure¶
Log in to the ECS as user root.
Run the following command to view the disks attached before specifications modification:
fdisk -l | grep 'Disk /dev/'
As shown in Figure 1, the ECS has three disks attached: /dev/vda, /dev/vdb, and /dev/vdc.
Run the following command to view disks attached after specifications modification:
df -h| grep '/dev/'
As shown in Figure 2, only one disk /dev/vda is attached to the ECS.
Check whether the number of disks obtained in step 3 is the same as that obtained in step 2.
If the numbers are the same, the disk attachment is successful. No further action is required.
If the numbers are different, the disk attachment failed. In this case, go to step 5.
Run the mount command to attach the affected disks.
For example, run the following command:
mount /dev/vdb1 /mnt/vdb1
In the preceding command, /dev/vdb1 is the disk to be attached, and /mnt/vdb1 is the path for disk attachment.
Important
Ensure that /mnt/vdb1 is empty. Otherwise, the attachment will fail.
Run the following commands to check whether the numbers of disks before and after specifications modifications are the same:
fdisk -l | grep 'Disk /dev/'
df -h| grep '/dev/'
If the numbers are the same, no further action is required.
If the numbers are different, contact customer service.
As shown in Figure 3, the numbers of disks before and after specifications modifications are the same. The disks are /dev/vda, /dev/vdb, and /dev/vdc.