Developer Operations¶
enable_light_colupdate¶
Parameter description: Specifies whether to enable the lightweight column-store update.
Type: USERSET
Value range: Boolean
on indicates that the lightweight column-store update is enabled.
off indicates that the lightweight column-store update is disabled.
Default value: off
Note
There is a low probability that an error is reported when lightweight UPDATE and backend column-store AUTOVACUUM coexist. You can run ALTER TABLE to set the table-level parameter enable_column_autovacuum_garbage to off to avoid this issue. If the table-level parameter enable_column_autovacuum_garbage is set to off, the backend column-store AUTOVACUUM of the table is disabled.
enable_fast_query_shipping¶
Parameter description: Specifies whether to use the distributed framework for a query planner.
Type: USERSET
Value range: Boolean
on indicates that execution plans are generated on CNs and DNs separately.
off indicates that the distributed framework is used. Execution plans are generated on CNs and then sent to DNs for execution.
Default value: on
enable_trigger_shipping¶
Parameter description: Specifies whether the trigger can be pushed to DNs for execution.
Type: USERSET
Value range: Boolean
on indicates that the trigger can be pushed to DNs for execution.
off indicates that the trigger cannot be pushed to DNs. It must be executed on the CN.
Default value: on
enable_remotejoin¶
Parameter description: Specifies whether JOIN operation plans can be delivered to DNs for execution.
Type: USERSET
Value range: Boolean
on indicates that JOIN operation plans can be delivered to DNs for execution.
off indicates that JOIN operation plans cannot be delivered to DNs for execution.
Default value: on
enable_remotegroup¶
Parameter description: Specifies whether the execution plans of GROUP BY and AGGREGATE can be delivered to DNs for execution.
Type: USERSET
Value range: Boolean
on indicates that the execution plans of GROUP BY and AGGREGATE can be delivered to DNs for execution.
off indicates that the execution plans of GROUP BY and AGGREGATE cannot be delivered to DNs for execution.
Default value: on
enable_remotelimit¶
Parameter description: Specifies whether the execution plan specified in the LIMIT clause can be pushed down to DNs for execution.
Type: USERSET
Value range: Boolean
on indicates that the execution plan specified in the LIMIT clause can be pushed down to DNs for execution.
off indicates that the execution plan specified in the LIMIT clause cannot be delivered to DNs for execution.
Default value: on
enable_limit_stop¶
Parameter description: whether to enable the early stop optimization for LIMIT statements. For a LIMIT n statement, if early stop is enabled, the CN requests the DN to end the execution after receiving n pieces of data. This method is applicable to complex queries with LIMIT. This parameter is supported only by clusters of version 8.1.3.320 or later.
Type: USERSET
Value range: Boolean
on indicates that early stop is enabled for LIMIT statements.
off indicates that early stop is disabled for LIMIT statements.
Default value: on
enable_remotesort¶
Parameter description: Specifies whether the execution plan of the ORDER BY clause can be delivered to DNs for execution.
Type: USERSET
Value range: Boolean
on indicates that the execution plan of the ORDER BY clause can be delivered to DNs for execution.
off indicates that the execution plan of the ORDER BY clause cannot be delivered to DNs for execution.
Default value: on
enable_join_pseudoconst¶
Parameter description: Specifies whether joining with the pseudo constant is allowed. A pseudo constant indicates that the variables on both sides of a join are identical to the same constant.
Type: USERSET
Value range: Boolean
on indicates that joining with the pseudo constant is allowed.
off indicates that joining with the pseudo constant is not allowed.
Default value: off
cost_model_version¶
Parameter description: Specifies the model used for cost estimation in the application scenario. This parameter affects the distinct estimation of the expression, HashJoin cost model, estimation of the number of rows, distribution key selection during redistribution, and estimation of the number of aggregate rows.
Type: USERSET
Value range: 0, 1, 2
0 indicates that the original cost estimation model is used.
1 indicates that the enhanced distinct estimation of the expression, HashJoin cost estimation model, estimation of the number of rows, distribution key selection during redistribution, and estimation of the number of aggregate rows are used on the basis of 0.
2 indicates that the ANALYZE sampling algorithm with better randomicity is used on the basis of 1 to improve the accuracy of statistics collection.
Default value: 1
debug_assertions¶
Parameter description: Specifies whether to enable various assertion checks. This parameter assists in debugging. If you are experiencing strange problems or crashes, set this parameter to on to identify programming defects. To use this parameter, the macro USE_ASSERT_CHECKING must be defined (through the configure option --enable-cassert) during the GaussDB(DWS) compilation.
Type: USERSET
Value range: Boolean
on indicates that various assertion checks are enabled.
off indicates that various assertion checks are disabled.
Note
This parameter is set to on by default if GaussDB(DWS) is compiled with various assertion checks enabled.
Default value: off
distribute_test_param¶
Parameter description: Specifies whether the embedded test stubs for testing the distribution framework take effect. In most cases, developers embed some test stubs in the code during fault injection tests. Each test stub is identified by a unique name. The value of this parameter is a triplet that includes three values: thread level, test stub name, and error level of the injected fault. The three values are separated by commas (,).
Type: USERSET
Value range: a string indicating the name of any embedded test stub.
Default value: -1, default, default
enable_crc_check¶
Parameter description: Specifies whether to enable data checks. Check information is generated when table data is written and is checked when the data is read. You are not advised to modify the settings.
Type: POSTMASTER
Value range: Boolean
on indicates that data checks are enabled.
off indicates that data checks are disabled.
Default value: on
Important
If CRC is enabled, all data on a page must be written to WALs when hint bits of tuples on the page are modified for the first time after a checkpoint. This deteriorates the performance of the first query after the checkpoint.
ignore_checksum_failure¶
Parameter description: Sets whether to ignore check failures (but still generates an alarm) and continues reading data. This parameter is valid only if enable_crc_check is set to on. Continuing reading data may result in breakdown, damaged data being transferred or hidden, failure of data recovery from remote nodes, or other serious problems. You are not advised to modify the settings.
Type: SUSET
Value range: Boolean
on indicates that data check errors are ignored.
off indicates that data check errors are reported.
Default value: off
default_orientation¶
Parameter description: Specifies the type of the table to be created if no storage method is specified during table creation. The value for each node must be the same.
Type: SUSET
Value range: row, column, column enabledelta
row: creates a row-store table.
column: creates a column-store table.
column enabledelta: creates a column-store table with delta tables enabled.
Default value: row
default_table_behavior¶
Parameter description: behavior type of the default table. This parameter is supported only by clusters of version 8.2.1 or later.
Type: USERSET
Value range: an empty string, column_btree_index
An empty string indicates that the behavior type of the table is not set.
column_btree_index indicates that the default index for creating a column-store table is btree.
Default value: an empty string
enable_colstore¶
Parameter description: Specifies whether to create a table as a column-store table by default when no storage method is specified. The value for each node must be the same. This parameter is used for tests. Users are not allowed to enable it.
Type: SUSET
Value range: Boolean
Default value: off
enable_force_vector_engine¶
Parameter description: Specifies whether to forcibly generate vectorized execution plans for a vectorized execution operator if the operator's child node is a non-vectorized operator. When this parameter is set to on, vectorized execution plans are forcibly generated. When enable_force_vector_engine is enabled, no matter it is a row-store table, column-store table, or hybrid row-column store table, if the plantree does not contain scenarios that do not support vectorization, the vectorized executor is forcibly used.
Type: USERSET
Value range: Boolean
Default value: off
enable_csqual_pushdown¶
Parameter description: Specifies whether to deliver filter criteria for a rough check during query.
Type: USERSET
Value range: Boolean
on indicates that a rough check is performed with filter criteria delivered during query.
off indicates that a rough check is performed without filter criteria delivered during query.
Default value: on
explain_dna_file¶
Parameter description: Specifies the name of a CSV file exported when explain_perf_mode is set to run.
Type: USERSET
Important
The value of this parameter must be an absolute path plus a file name with the extension .csv.
Value range: a string
Default value: NULL
explain_perf_mode¶
Parameter description: Specifies the display format of the explain command.
Type: USERSET
Value range: normal, pretty, summary, and run
normal indicates that the default printing format is used.
pretty indicates that the optimized display mode of GaussDB(DWS) is used. A new format contains a plan node ID, directly and effectively analyzing performance.
summary indicates that the analysis result based on such information is printed in addition to the printed information in the format specified by pretty.
run indicates that in addition to the printed information specified by summary, the database exports the information as a CSV file.
Default value: pretty
join_num_distinct¶
Parameter description: Controls the default distinct value of the join column or expression in application scenarios.
Type: USERSET
Value range: a double-precision floating point number greater than or equal to -100. Decimals may be truncated when displayed on clients.
If the value is greater than 0, the value is used as the default distinct value.
If the value is greater than or equal to -100 and less than 0, it means the percentage used to estimate the default distinct value.
If the value is 0, the default distinct value is 200.
Default value: -20
outer_join_max_rows_multipler¶
Parameter description: Specifies the maximum number of estimated rows for outer joins.
Type: USERSET
Value range: 0 or a double-precision floating point number greater than or equal to 1. Decimals may be truncated when displayed on clients.
If the value is 0, the estimated number of rows for outer joins is not limited.
If the value is greater than or equal to 1, the estimated number of rows cannot exceed a multiple of the number of rows in the foreign table in the outer join.
Default value: 1.1
qual_num_distinct¶
Parameter description: Controls the default distinct value of the filter column or expression in application scenarios.
Type: USERSET
Value range: a double-precision floating point number greater than or equal to -100. Decimals may be truncated when displayed on clients.
If the value is greater than 0, the value is used as the default distinct value.
If the value is greater than or equal to -100 and less than 0, it means the percentage used to estimate the default distinct value.
If the value is 0, the default distinct value is 200.
Default value: 200
trace_notify¶
Parameter description: Specifies whether to generate a large amount of debugging output for the LISTEN and NOTIFY commands. client_min_messages or log_min_messages must be DEBUG1 or lower so that such output can be recorded in the logs on the client or server separately.
Type: USERSET
Value range: Boolean
on indicates that the function is enabled.
off indicates that the function is disabled.
Default value: off
trace_sort¶
Parameter description: Specifies whether to display information about resource usage during sorting operations in logs. This parameter is available only when the macro TRACE_SORT is defined during the GaussDB(DWS) compilation. However, TRACE_SORT is currently defined by default.
Type: USERSET
Value range: Boolean
on indicates that the function is enabled.
off indicates that the function is disabled.
Default value: off
zero_damaged_pages¶
Parameter description: Specifies whether to detect a damaged page header that causes GaussDB(DWS) to report an error, aborting the current transaction.
Type: SUSET
Value range: Boolean
on indicates that the function is enabled.
off indicates that the function is disabled.
Note
Setting this parameter to on causes the system to report a warning, pad the damaged page with zeros, and then continue with subsequent processing. This behavior will damage data, that is, all rows on the damaged page. However, it allows you to bypass the error and retrieve rows from any undamaged pages that are present in the table. Therefore, it is useful for restoring data that is damaged due to a hardware or software error. In most cases, you are not advised to set this parameter to on unless you do not want to restore data from the damaged pages of a table.
For a column-store table, the system will skip the entire CU and then continue processing. The supported scenarios include the CRC check failure, magic check failure, and incorrect CU length.
Default value: off
replication_test¶
Parameter description: Specifies whether to enable internal testing on the data replication function.
Type: USERSET
Value range: Boolean
on indicates that internal testing on the data replication function is enabled.
off indicates that internal testing on the data replication function is disabled.
Default value: off
cost_param¶
Parameter description: Controls use of different estimation methods in specific customer scenarios, allowing estimated values approximating to onsite values. This parameter can control various methods simultaneously by performing AND (&) operations on the bit for each method. A method is selected if its value is not 0.
If cost_param & 1 is not set to 0, an improvement mechanism is selected for calculating a non-equi join selection rate, which is more accurate in estimation of self-join (join between two same tables). In V300R002C00 and later, cost_param & 1=0 is not used. That is, an optimized formula is selected for calculation.
When cost_param & 2 is set to a value other than 0, the selection rate is estimated based on multiple filter criteria. The lowest selection rate among all filter criteria, but not the product of the selection rates for two tables under a specific filter criterion, is used as the total selection rate. This method is more accurate when a close correlation exists between the columns to be filtered.
When cost_param & 4 is not 0, the selected debugging model is not recommended when the stream node is evaluated.
When cost_param & 16 is not 0, the model between fully correlated and fully uncorrelated models is used to calculate the comprehensive selection rate of two or more filtering conditions or join conditions. If there are many filtering conditions, the strongly-correlated model is preferred.
Type: USERSET
Value range: an integer ranging from 1 to INT_MAX
Default value: 16
convert_string_to_digit¶
Parameter description: Specifies the implicit conversion priority, which determines whether to preferentially convert strings into numbers.
Type: USERSET
Value range: Boolean
on indicates that strings are preferentially converted into numbers.
off indicates that strings are not preferentially converted into numbers.
Default value: on
Important
Modify this parameter only when absolutely necessary because the modification will change the rule for converting internal data types and may cause unexpected results.
nls_timestamp_format¶
Parameter description: Specifies the default timestamp format.
Type: USERSET
Value range: a string
Default value: DD-Mon-YYYY HH:MI:SS.FF AM
enable_partitionwise¶
Parameter description: Specifies whether to select an intelligent algorithm for joining partitioned tables.
Type: USERSET
Value range: Boolean
on indicates that an intelligent algorithm is selected.
off indicates that an intelligent algorithm is not selected.
Default value: off
enable_partition_dynamic_pruning¶
Parameter description: Specifies whether dynamic pruning is enabled during partition table scanning.
Type: USERSET
Value range: Boolean
on: enable
off: disable
Default value: on
max_user_defined_exception¶
Parameter description: Specifies the maximum number of exceptions. The default value cannot be changed.
Type: USERSET
Value range: an integer
Default value: 1000
datanode_strong_sync¶
Parameter description: This parameter no longer takes effect.
Type: USERSET
Value range: Boolean
on indicates that forcible synchronization between stream nodes is enabled.
off indicates that forcible synchronization between stream nodes is disabled.
Default value: off
enable_global_stats¶
Parameter description: Specifies the current statistics mode. This parameter is used to compare global statistics generation plans and the statistics generation plans for a single DN. This parameter is used for tests. Users are not allowed to enable it.
Type: SUSET
Value range: Boolean
on or true indicates the global statistics mode.
off or false indicates the single-DN statistics mode.
Default value: on
enable_fast_numeric¶
Parameter description: Specifies whether to enable optimization for numeric data calculation. Calculation of numeric data is time-consuming. Numeric data is converted into int64- or int128-type data to improve numeric data calculation performance.
Type: USERSET
Value range: Boolean
on/true indicates that optimization for numeric data calculation is enabled.
off/false indicates that optimization for numeric data calculation is disabled.
Default value: on
enable_row_fast_numeric¶
Parameter description: Specifies the format in which numeric data in a row-store table is spilled to disks.
Type: USERSET
Value range: Boolean
on/true indicates that numeric data in a row-store table is spilled to disks in bigint format.
off/false indicates that numeric data in a row-store table is spilled to disks in the original format.
Important
If this parameter is set to on, you are advised to enable enable_force_vector_engine to improve the query performance of large data sets. However, compared with the original format, there is a high probability that the bigint format occupies more disk space. For example, the TPC-H test set occupies about 7% more space (reference value, may vary depending on the environment).
Default value: off
rewrite_rule¶
Parameter description: Specifies the rewriting rule for enabled optional queries. Some query rewriting rules are optional. Enabling them cannot always improve query efficiency. In a specific customer scenario, you can set the query rewriting rules through the GUC parameter to achieve optimal query efficiency.
This parameter can control the combination of query rewriting rules, for example, there are multiple rewriting rules: rule1, rule2, rule3, and rule4. To set the parameters, you can perform the following operations:
set rewrite_rule=rule1; --Enable query rewriting rule rule1.
set rewrite_rule=rule2,rule3; --Enable query rewriting rules rule2 and rule3.
set rewrite_rule=none; --Disable all optional query rewriting rules.
Type: USERSET
Value range: a string
none: Does not use any optional query rewriting rules.
lazyagg: Uses the Lazy Agg query rewriting rules for eliminating aggregation operations in subqueries.
magicset: Uses the Magic Set query rewriting rule (to push down conditions from the main query to pulled up sublinks).
uniquecheck: Uses the Unique Check rewriting rule. (This function can help optimization engineers improve scenarios where the target column lack the expression sublink of the aggregate function. Note that it can only be enabled if the value of the target column is unique after the sublink is aggregated based on the associated column.)
disablerep: Uses the function that prohibits pulling up sublinks of the replication table. (Disables sublink pull-up for the replication table.)
projection_pushdown: the Projection Pushdown rewriting rule (Removes columns that are not used by the parent query from the subquery).
or_conversion: the OR conversion rewriting rule (eliminates the association OR conditions that are inefficient to execute).
plain_lazyagg: the Plain Lazy Agg query rewriting rule (eliminates aggregation operations in a single subquery). This option is supported only by clusters of version 8.1.3.100 or later.
eager_magicset: Uses the eager_magicset query rewriting rule (to push down conditions from the main query to subqueries). This option is supported only by clusters of version 8.2.0 or later.
Default value: magicset, or_conversion, projection_pushdown, and plain_lazyagg
enable_compress_spill¶
Parameter description: Specifies whether to enable the compression function of writing data to a disk.
Type: USERSET
Value range: Boolean
on/true indicates that optimization for writing data to a disk is enabled.
off/false indicates that optimization for writing data to a disk is disabled.
Default value: on
analysis_options¶
Parameter description: Specifies whether to enable function options in the corresponding options to use the corresponding location functions, including data verification and performance statistics. For details, see the options in the value range.
Type: USERSET
Value range: a string
LLVM_COMPILE indicates that the codegen compilation time of each thread is displayed on the explain performance page.
HASH_CONFLICT indicates that the log file in the pg_log directory of the DN process displays the hash table statistics, including the hash table size, hash chain length, and hash conflict information.
STREAM_DATA_CHECK indicates that a CRC check is performed on data before and after network data transmission.
Default value: off(ALL), which indicates that no location function is enabled.
resource_track_log¶
Parameter description: Specifies the log level of self-diagnosis. Currently, this parameter takes effect only in multi-column statistics.
Type: USERSET
Value range: a string
summary: Brief diagnosis information is displayed.
detail: Detailed diagnosis information is displayed.
Currently, the two parameter values differ only when there is an alarm about multi-column statistics not collected. If the parameter is set to summary, such an alarm will not be displayed. If it is set to detail, such an alarm will be displayed.
Default value: summary
hll_default_log2m¶
Parameter description: Specifies the number of buckets for HLL data. The precision of distinct values calculated by HLL is impacted by the number of buckets. Increasing the number of buckets results in smaller deviations. The deviation range is as follows: [-1.04/2log2m*1/2, +1.04/2log2m*1/2]
Type: USERSET
Value range: an integer ranging from 10 to 16
Default value: 11
hll_default_regwidth¶
Parameter description: Specifies the number of bits in each bucket for HLL data. A larger value indicates more memory occupied by HLL. hll_default_regwidth and hll_default_log2m determine the maximum number of distinct values that can be calculated by HLL. For details, see Table 1.
Type: USERSET
Value range: an integer ranging from 1 to 5
Default value: 5
log2m | regwidth = 1 | regwidth = 2 | regwidth = 3 | regwidth = 4 | regwidth = 5 |
|---|---|---|---|---|---|
10 | 7.4e+02 | 3.0e+03 | 4.7e+04 | 1.2e+07 | 7.9e+11 |
11 | 1.5e+03 | 5.9e+03 | 9.5e+04 | 2.4e+07 | 1.6e+12 |
12 | 3.0e+03 | 1.2e+04 | 1.9e+05 | 4.8e+07 | 3.2e+12 |
13 | 5.9e+03 | 2.4e+04 | 3.8e+05 | 9.7e+07 | 6.3e+12 |
14 | 1.2e+04 | 4.7e+04 | 7.6e+05 | 1.9e+08 | 1.3e+13 |
15 | 2.4e+04 | 9.5e+04 | 1.5e+06 | 3.9e+08 | 2.5e+13 |
hll_default_expthresh¶
Parameter description: Specifies the default threshold for switching from the explicit mode to the sparse mode.
Type: USERSET
Value range: an integer ranging from -1 to 7 -1 indicates the auto mode; 0 indicates that the explicit mode is skipped; a value from 1 to 7 indicates that the mode is switched when the number of distinct values reaches 2hll_default_expthresh.
Default value: -1
hll_default_sparseon¶
Parameter description: Specifies whether to enable the sparse mode by default.
Type: USERSET
Valid value: 0 and 1 0 indicates that the sparse mode is disabled by default. 1 indicates that the sparse mode is enabled by default.
Default value: 1
hll_max_sparse¶
Parameter description: Specifies the size of max_sparse.
Type: USERSET
Value range: an integer ranging from -1 to INT_MAX
Default value: -1
enable_compress_hll¶
Parameter description: Specifies whether to enable memory optimization for HLL.
Type: USERSET
Value range: Boolean
on or true indicates that memory optimization is enabled.
off or false indicates that memory optimization is disabled.
Default value: off
udf_memory_limit¶
Parameter description: Controls the maximum physical memory that can be used when each CN or DN executes UDFs.
Type: POSTMASTER
Value range: an integer ranging from 200 x 1024 to the value of max_process_memory and the unit is KB.
Default value: 0.05 * max_process_memory
FencedUDFMemoryLimit¶
Parameter description: Controls the virtual memory used by each fenced udf worker process.
Type: USERSET
Suggestion: You are not advised to set this parameter. You can set udf_memory_limit instead.
Value range: an integer. The unit can be KB, MB, or GB. 0 indicates that the memory is not limited.
Default value: 0
UDFWorkerMemHardLimit¶
Parameter description: Specifies the maximum value of fencedUDFMemoryLimit.
Type: POSTMASTER
Suggestion: You are not advised to set this parameter. You can set udf_memory_limit instead.
Value range: an integer. The unit can be KB, MB, or GB.
Default value: 1 GB
enable_pbe_optimization¶
Parameter description: Specifies whether the optimizer optimizes the query plan for statements executed in Parse Bind Execute (PBE) mode.
Type: USERSET
Value range: Boolean
on indicates that the optimizer optimizes the query plan.
off indicates that the optimization does not optimize the query plan.
Default value: on
enable_light_proxy¶
Parameter description: Specifies whether the optimizer optimizes the execution of simple queries on CNs.
Type: USERSET
Value range: Boolean
on indicates that the optimizer optimizes the execution.
off indicates that the optimization does not optimize the execution.
Default value: on
checkpoint_flush_after¶
Parameter description: Specifies the number of consecutive disk pages that the checkpointer writer thread writes before asynchronous flush. In GaussDB(DWS), the size of a disk page is 8 KB.
Type: SIGHUP
Value range: an integer ranging from 0 to 256. 0 indicates that the asynchronous flush function is disabled. For example, if the value is 32, the checkpointer thread continuously writes 32 disk pages (that is, 32 x 8 = 256 KB) before asynchronous flush.
Default value: 32
enable_parallel_ddl¶
Parameter description: Controls whether multiple CNs can concurrently perform DDL operations on the same database object.
Type: USERSET
Value range: Boolean
on indicates that DDL operations can be performed safely and that no distributed deadlock occurs.
off indicates that DDL operations cannot be performed safely and that distributed deadlocks may occur.
Default value: on
gc_fdw_verify_option¶
Parameter description: Specifies whether to enable the logic for verifying the number of rows in a result set in the collaborative analysis. This parameter is supported only by clusters of version 8.1.3.310 or later.
Type: USERSET
Value range: Boolean
on indicates that the logic for verifying the number of rows in the result set is enabled. The SELECT COUNT statement is used to obtain the expected number of rows and compare it with the actual number of rows.
off indicates that the logic for verifying the number of rows in the result set is disabled and only the required result set is obtained.
Default value: on
Note
If this parameter is enabled, the performance deteriorates slightly. In performance-sensitive scenarios, you can disable this parameter to improve the performance.
If an exception is thrown during the result set row verification. You can set log_min_messages=debug1 and logging_module='on(COOP_ANALYZE)' to obtain the collaborative analysis logs.
show_acce_estimate_detail¶
Parameter description: When the GaussDB(DWS) cluster is accelerated (acceleration_with_compute_pool is set to on), specifies whether the EXPLAIN statement displays the evaluation information about execution plan pushdown to computing Node Groups. The evaluation information is generally used by O&M personnel during maintenance, and it may affect the output display of the EXPLAIN statement. Therefore, this parameter is disabled by default. The evaluation information is displayed only if the verbose option of the EXPLAIN statement is enabled.
Type: USERSET
Value range: Boolean
on indicates that the evaluation information is displayed in the output of the EXPLAIN statement.
off indicates that the evaluation information is not displayed in the output of the EXPLAIN statement.
Default value: off
support_batch_bind¶
Parameter description: Specifies whether to batch bind and execute PBE statements through interfaces such as JDBC, ODBC, and Libpq.
Type: SIGHUP
Value range: Boolean
on indicates that batch binding and execution are used.
off indicates that batch binding and execution are not used.
Default value: on
full_group_by_mode¶
Parameter description: This parameter is used together with disable_full_group_by_mysql to control the two different behaviors after the disable_full_group_by_mysql syntax feature is disabled. This parameter is supported only by clusters of version 8.2.1.109 or later.
Type: USERSET
Value range: a string
nullpadding indicates that NULL values in a non-aggregation column are replaced with values and non-null values in the column are used. The result set may contain different rows.
notpadding indicates that NULL values are not processed for non-aggregation columns and the entire row of data is obtained. The result set of non-aggregation columns is a random row.
Default value: notpadding
Important
This parameter takes effect only when disable_full_group_by_mysql is enabled in the MySQL compatibility library and non-aggregation columns exist in the query. The two behaviors of this parameter also take effect only for non-aggregation columns in the query.