Accessing a Cluster from a Kibana Public Network

For CSS clusters that have security mode enabled, you can enable Kibana public access. After the configuration is complete, an IP address will be provided to access Kibana of this cluster over the Internet.

You can configure Kibana public access during cluster creation, or after a cluster in security mode is created.

Note

The whitelist for Kibana public network access depends on the ELB whitelist. After you updated the whitelist, the new settings take effect immediately for new connections. For existing persistent connections using the IP addresses that have been removed from the whitelist, the new settings take effect about 1 minute after these connections are stopped.

Configuring Kibana Public Access When Creating a Cluster

  1. Log in to the CSS management console.

  2. Click Create Cluster in the upper right corner. The Create Cluster page is displayed.

  3. On the Create Cluster page, enable Security Mode.

  4. Set Advanced Settings to Custom, enable Kibana Public Access, and set parameters.

    Table 1 Kibana public access parameters

    Parameter

    Description

    Bandwidth

    Bandwidth for accessing Kibana with the public IP address

    Value range: 1 to 100

    Unit: Mbit/s

    Access Control

    If you disable this function, all IP addresses can access Kibana through the public IP address. If you enable this function, only IP addresses or IP address in the whitelist can access Kibana through the public IP address.

    Whitelist

    IP address or IP address range allowed to access a cluster. Use commas (,) to separate multiple addresses. This parameter can be configured only when Access Control is enabled.

    You are advised to enable this function.

    After the cluster is created, click the cluster name to go to the Basic Information page. On the Kibana Public Access page, you can view the Kibana public IP address.

Configuring Kibana Public Access for an Existing Cluster

You can enable, disable, modify, and view Kibana public access for an existing cluster that has security mode enabled.

  1. Log in to the CSS management console.

  2. In the navigation pane, choose Clusters > OpenSearch.

  3. Choose Clusters in the navigation pane. On the Clusters page, click the name of the target cluster.

  4. Click the Kibana Public Access tab. Turn on the Kibana Public Access switch to enable the Kibana public access function.

  5. On the displayed page, set parameters.

    Table 2 Kibana public access parameters

    Parameter

    Description

    Bandwidth

    Bandwidth for accessing Kibana with the public IP address

    Value range: 1 to 100

    Unit: Mbit/s

    Access Control

    If you disable this function, all IP addresses can access Kibana through the public IP address. If you enable this function, only IP addresses or IP address in the whitelist can access Kibana through the public IP address.

    Whitelist

    IP address or IP address range allowed to access a cluster. Use commas (,) to separate multiple addresses. This parameter can be configured only when Access Control is enabled.

    You are advised to enable this function.

  6. After you set the parameters, click OK.

Modifying Kibana Public Access

For clusters configured Kibana public access, you can modify its bandwidth and access control or disable this function.

  1. Log in to the CSS management console.

  2. In the navigation pane, choose Clusters > OpenSearch.

  3. Choose Clusters in the navigation pane. On the Clusters page, click the name of the target cluster.

  4. Click the Kibana Public Access tab to modify the Kibana public access configuration.

    • Modifying bandwidth

      Click Modify on the right of Bandwidth. On the Modify Bandwidth page, modify the bandwidth and click OK.

    • Modifying access control

      Click Modify on the right of Access Control. On the Modify Access Control page, set Access Control and Whitelist, and click OK.

    • Disabling Kibana public access

      Toggle off the Kibana Public Access switch.

Accessing OpenSearch Dashboard with the Public IP Address

After configuring Kibana public access, you will obtain a public IP address that you can use to access OpenSearch Dashboard of this cluster.

  1. Log in to the CSS management console.

  2. In the navigation pane, choose Clusters > OpenSearch.

  3. Choose Clusters in the navigation pane. On the Clusters page, click the name of the target cluster.

  4. Click the Kibana Public Access tab to obtain the Kibana public IP address.

  5. Use this IP address to access OpenSearch Dashboard of this cluster through the Internet.